nowbotgov

DanielElliot:They’re not selling them on the Amazon Kindle store, but the file works just fine on the Kindle. I just emailed it to my Kindle with no issues.Yeah, but that’s really not the point. Buying through Amazon is incredibly easy and hassle free (and their prices are in dollars).

1. Overlight Rpg Pdf Download

Buying from a random third party site, especially one that isn’t primarily a store? Ick.I mean, it won’t prevent me from taking advantage of the free books while they last (though I already own First and Only), but I doubt I’ll be buying. The Bird Flu:No audiobooks through Audible means I won’t be buying any of those either. It’s too bad, I was looking forward to that.Let’s see what their DRM method looks like before complaining.

For example from a consumer standpoint, I prefer model over Amazon. Baen provides DRM-free versions in HTML, Mobi, ePub, Microsoft Reader, Sony Reader, and RTF formats. If you change readers, you simply go back to Baen and download books that you’ve purchased in another format.From my point of view, the extra hassle with not having the book automatically transferred (as it would be if I bought from the Amazon store) is more than made up for by the fact that everything is DRM free.Granted, I suspect that Black Library will get completely hammered by people pirating books if they go DRM free. However, if they can make it work economically, I would prefer Black Library ebooks and audio files available DRM-free. I’m not sure why y’all are so down on such a model. Assuming that’s the way they’re going, this gives us the widest range of formats available and the greatest flexibility on where we can use their products. Because I honestly don’t particularly care about Kindle DRM.

I’m reading the books on my Kindle, I have no intention of going outside the Kindle ecosystem, and I value having my books stored in the cloud where I can easily snag them whenever I care to, as many times as I care to. Combine that with ease of purchase and Amazon’s excellent site design, and I’d just really rather get my ebooks there.

I’m against game DRM because it actively harms the game experience, cripples my ability to reinstall the game (in some instances), and can potentially make the game permanently unavailable at an arbitrary future time - not just for me, but for everybody. With Kindle DRM, worst case scenario is that I lose out on my Amazon-purchased ebooks. Sucks, but I’m not that worried about it. As long as -somebody- has a DRM free or print version available, that book will still be there.And FWIW, although I personally am only likely to buy from the Kindle store, I wholeheartedly support books being available elsewhere in the ebook market.

The more places people can buy a product, the better. Lack of competition is terribly consumer-unfriendly. One reason I don’t like the idea of the Black Library being the only place to get ebooks of their novels.

(Aside from piracy, that is. Pirate Warhammer and Warhammer 40K ebooks have been available for a lot longer than legitimate copies.). Malkav11:Repetitive is one thing that the Gaunt’s Ghosts series is not. While they’re certainly all war stories, he changes up the format and location substantially from book to book, ranging from city sieges to high risk infiltration/assassination missions on an enemy-held world.I’ll second that. While it’s possible someone could find Gaunt’s stretching plausibility from time to time as the First go from frying pan to fire and back again, there’s plenty of effort on Abnett’s part to keep the series fresh. Andrew Mayer:there’s plenty of effort on Abnett’s part to keep the series fresh.I found his efforts insufficient. Yes, yes, now the Tanith are jumping out of zeppelins to battle the legions of chaos rather than attempting to reenact Stalingrad.

That’s not really enough. I also have a vague memory of him being rather fond of deus ex machinas, but it is a vague memory.I do think the omni format was part of the problem. I doubt I’d have tired of the books as quickly if I hadn’t been reading them back to back. I recently experienced something similar with the first Ciaphas Cain omni.

If I do get the second, I’ll probably read something else between novels.

First Published: October 1, 2015 Last Updated: November 07, 2017 This release note describes the features, modifications, and caveats for the Cisco IOS XE Release 3.8.xE software on the Catalyst 4500-X Series switch. Cisco IOS XE Release 3.8.xE is a feature rich new software feature release for IOS and IOS-XE based Catalyst Access Switching products. This release will provide extended maintenance. Support for Cisco IOS XE Release 3.8.xE follows the standard Cisco Systems® support policy, available at For more information on the Catalyst 4500-X switch, visit the following URL. Cisco IOS Software Packaging The Enterprise Services image supports all Cisco Catalyst 4500-X Series software features based on Cisco IOS Software, including enhanced routing.

The IP Base image supports Open Shortest Path First (OSPF) for Routed Access, Enhanced Interior Gateway Routing Protocol (EIGRP) 'limited' Stub Routing, Nonstop Forwarding/Stateful Switchover (NSF/SSO), and RIPv1/v2. The IP Base image does not support enhanced routing features such as BGP, Intermediate System-to-Intermediate System (IS-IS), Full OSPF, Full Enhanced Interior Gateway Routing Protocol (EIGRP) & Virtual Routing Forwarding (VRF-lite).Starting with Cisco IOS Release XE 3.5.0E, OSPF Routed Access in IP Base supports up to 1000 routes.

Features Not Supported on the Cisco Catalyst 4500-X Series Switches The following features are not supported on a Catalyst 4500-X Series switches:. CISCO-IETF-IP-FORWARD-MIB.

CISCO-IETF-IP-MIB. LLDP HA. SMI Proxy. SSO (in non-VSS mode). WCCP Version 1.

SSH Version 1 With some exceptions, the VSS maintains “feature parity” with the standalone Catalyst 4500 or 4500-X series switches. Major exceptions include:. CFM D8.1. Energywise. Mediatrace (Medianet active video monitoring feature). Metadata (Medianet feature).

Per VLAN Learning. UDE. UDLR. VMPS Client. Base Switch PIDs WS-C4500X-32SFP+ Catalyst 4500-X 32 Port 10GE IP Base, Front-to-Back Cooling i.e.

Port Side to Power Supply Cooling with no Power Supply cat4500e-universalk9.bin cat4500e-universal.SPA.03.04.00.SG.151-2.SG.bin WS-C4500X-F-32SFP+ Catalyst 4500-X 32 Port 10GE IP Base, Back-to-Front Cooling i.e.Power Supply to Port Side Cooling with no Power Supply cat4500e-universalk9.bin cat4500e-universal.SPA.03.04.00.SG.151-2.SG.bin WS-C4500X-16SFP+ Catalyst 4500-X 16 Port 10GE IP Base, Front-to-Back Cooling i.e. Port Side to Power Supply Cooling with no Power Supply cat4500e-universalk9.bin cat4500e-universal.SPA.03.04.00.SG.151-2.SG.bin WS-C4500X-F-16SFP+ Catalyst 4500-X 16 Port 10GE IP Base, Back-to-Front Cooling i.e. Description Cisco Encapsulated Remote Switched Port Analyzer (ERSPAN) Helps monitor traffic on source ports or source VLANs, on remote destination switches or probes across the network.

ERSPAN uses a generic routing encapsulation tunnel (GRE) tunnel to carry traffic between switches. Limiting Login Helps network administrators to limit the login attempt of users to a network.An Introduction to Evidence-Based Design: Exploring Healthcare and Design (EDAC Study Guides, Volume 1) by Eileen Malone (2008-05-03) Eileen Malone, Upali Nanda, Constance Harmsen, Karen Reno, Eve Edelstein, D. Kirk Hamilton, Alberto Salvatore, Julie R.

Free Download Whatsapp For Htc Snap S521. Mann-Dooks, Charisse Oland on Amazon.com.When a user fails to successfully login to a network within a configurable number of attempts within a configurable time limit, the user can be blocked. This feature is enabled only for local users and not for remote users. You need to configure the aaa authentication rejected command in global configuration mode to enable this feature. X.509v3 with SSH Authentication Uses the public key algorithm (PKI) for server and user authentication, and allows the Secure Shell (SSH) protocol to verify the identity of the owner of a key pair via digital certificates, signed and issued by a Certificate Authority (CA). Description Auto Identity Provides a set of built-in policies at the global configuration and interface configuration modes. The Auto Identity feature uses the Cisco Common Classification Policy Language (C3PL)-based configuration that significantly reduces the number of commands used to configure both authentication methods and interface-level commands.

The Auto Identity feature provides a set of built-in policies that are based on policy maps, class maps, parameter maps, and interface templates.(IP Base and Enterprise Services) Bidirectional Forwarding Detection (BFD) for Intermediate System to Intermediate System (IS-IS) BFD Support for the IS-IS protocol, on IPv4 and IPv6. (Enterprise Services) Cisco TrustSec—SGACL Logging and Statistics Option to enable logging of Security Group-Based Access Control (SGACL) information and Access Control Entry (ACE) statistics. The logged information includes the source and destination security group tag, the SGACL policy name, packet protocol type, the action performed on the packet, and ACE matches. For more information, see the on cisco. Com.(IP Base and Enterprise Services) LACP Min-Links Allows you to specify the minimum number of active ports that must be in the link-up state and bundled in an EtherChannel for the port channel interface to transition to the link-up state. (IP Base and Enterprise Services) Link State Group The upper limit of the link state group number value is now increased (from 10) to 20. You can configure upto 20 link state groups per switch.(IP Base and Enterprise Services) Named VLAN Option to specify a VLAN name for access and voice VLAN.

(IP Base and Enterprise Services) Policy-Based Routing (PBR) with Object Tracking Support for a new command set ip next-hop verify-availability, to use PBR with object tracking, to verify the reachability of the next-hop IP address to which to forward packets, using an Internet Control Message Protocol (ICMP) ping as the verification method. This feature is supported only on IPv4 PBR and is not supported on IPv6 PBR, and PBR on VSS and VRF.(IP Base and Enterprise Services) Rapid PVST+ as Default Rapid PVST+ is now the default spanning-tree mode used on all Ethernet port-based VLANs. (IP Base and Enterprise Services) Resilient Ethernet Protocol (REP) Enhancements Option to configure an administrative VLAN for each segment.

This allows you to configure any number of administrative VLANs as long as it is per segment. (IP Base and Enterprise Services) Spanning Tree Protocol (STP) Enhancements Bridge Assurance—Protects the network from bridging loops that are caused by unidirectional links, or a malfunctioning switch. Bridge Assurance is enabled by default, and applies only to PortFast network ports. Detecting UniDirectional Link Failures (or the STP Dispute Mechanism)—The switch port detects unidirectional link failures by checking the consistency of the port role and state of the BPDUs received. When a conflict is detected, the designated port reverts to a blocking state.This feature does not require any user configuration. PVST+ Simulation—This is now user-configurable. You can enable or disable this feature per port, or globally.

PVST+ simulation is enabled by default.It allows seamless interoperability between MST and Rapid PVST+. (IP Base and Enterprise Services) Storm Control Enhancements Option to specify the threshold level for broadcast traffic in bits per second (bps) and packets per second (pps).(IP Base and Enterprise Services) UDP Forwarding Support for IP Redundancy Virtual Router Group UDP broadcast is now limited to the active router in the Virtual Router Group (VRG). Only a VRG that is implemented with the Hot Standby Routing Protocol (HSRP) is supported (IP Base and Enterprise Services) VLAN Switching and Selective QinQ on the Same Port Option to disable default behavior of dropping non-translated VLANs.

When configuring VLAN mapping for selective Q-in-Q on a trunk port, you now have the option to specify that packets that do not match, should not be dropped (Enter the no switchport vlan mapping default drop command). (IP Base, and Enterprise Services) VRF-aware WCCP for IPv4 traffic WCCP now supports IPv4 traffic redirection to and from Virtual Routing and Forwarding (VRF) interfaces. (Enterprise Services) VRF-aware WCCP for IPv6 traffic WCCP now supports IPv6 traffic redirection to and from Virtual Routing and Forwarding (VRF) interfaces.

(Enterprise Services) VSS The REP, Flexlinks, Unidirectional Link Detection (UDLD), and Fast UDLD features are now supported on VSS.(IP Base and Enterprise Services) WCCP Version 2 for IPv6 WCCPv2 now supports IPv6 traffic. (IP Base and Enterprise Services). Limitations and Restrictions. mGRE with NHRP (DMVPN) is not supported.

For few ACLs, OGACL programming results in “Partial Programmed” state. (CSCvc21299). The maximum MTE supported on Catalyst 4500 switches is 8000, per direction. Although the show memory command is supported on Catalyst 4500 series switches, the CLI output for the command shows the value 0 for the config total, on Catalyst 4500 series switches using a daughter card on Supervisor Engine 7-E.This issue is, however, not seen on switches with Supervisor Engine 7-E baseboard. (CSCup28930).

When you install the GLC-T (1000Base-T) SFP transceiver, 10/100 Mbps with auto negotiation is not supported. When you use the GLC-GE-100FX module between a Cisco Catalyst 4500-X switch and a Cisco Catalyst 2000 or 3000 series switch, traffic does not flow after the first time you change the interface from half duplex to a full duplex.

Workaround: You have to enter the shutdown and then the no shutdown interface configuration command for traffic flow to resume. (CSCus14532). The system allows you to delete policy maps related to these Auto QoS profiles: – Auto QoS enterprise – Auto QoS guest – Auto QoS voice The problem is seen on a Catalyst 4500 series switch running Cisco IOS-XE release 3.7.0E, when you configure QoS using Auto Qos and you try to delete an Auto QoS profile related policy map. Workaround: To recover the deleted policy-map, remove all the policies related to that profile, remove Auto QoS configuration from the WLAN, and then reconfigure Auto QoS.

VSS: Do not use SVLAN for routing in SP network on ingress switch (where the mapping is present). This is not a valid scenario. Starting with Release IOS XE 3.3.0SG, the seven RP restriction was removed. More than 16K QoS policies can be configured in software. Only the first 16K are installed in hardware. Adjacency learning (through ARP response frames) is restricted to roughly 1000 new adjacencies per second, depending on CPU utilization. This should only impact large networks on the first bootup.

After adjacencies are learned they are installed in hardware. Multicast fastdrop entries are not created when RPF failure occurs with IPv6 multicast traffic. In a topology where reverse path check failure occurs with IPv6 multicast, this may cause high CPU utilization on the switch. The SNMP ceImageFeature object returns a similar feature list for all the three license levels (IP Base and EntServices). Although the activated feature set for a universal image varies based on the installed feature license, the value displayed by this object is fixed and is not based on the feature license level.

Performing an ISSU from a prior release to IOS XE 3.6.0E is not supported. Standard TFTP implementation limits the maximum size of a file that can be transferred to 32 MB.

If ROMMON is used to boot an IOS image that is larger than 32 MB, the TFTP transfer fails at the 65,xxx datagram.TFTP numbers its datagrams with a 16 bit field, resulting in a maximum of 65,536 datagrams. Because each TFTP datagram is 512 bytes long, the maximum transferable file is 65536 x 512 = 32 MB. If both the TFTP client (ROMMON) and the TFTP server support block number wraparound, no size limitation exists. Cisco has modified the TFTP client to support block number wraparound.

So, if you encounter a transfer failure, use a TFTP server that supports TFTP block number wraparound. Because most implementations of TFTP support block number wraparound, updating the TFTP daemon should fix the issue. A XML-PI specification file entry does not return the desired CLI output. The outputs of certain commands, such as show ip route and show access-lists, contain non-deterministic text. While the output is easily understood, the output text does not contain strings that are consistently output. A general purpose specification file entry is unable to parse all possible output.

Workaround (1): While a general purpose specification file entry may not be possible, a specification file entry might be created that returns the desired text by searching for text that is guaranteed to be in the output.If a string is guaranteed to be in the output, it can be used for parsing. For example, the output of the show ip access-lists SecWizGi317outip command is this.Workaround: Define a policy-map with a different name and then reattach. CSCti26172.

If the number of unique FNF monitors attached to target exceeds 2048 (one per target), a switch responds slowly: Workarounds: – Decrease the number of monitors. – Attach the same monitor to multiple targets.CSCti43798. ciscoFlashPartitionFileCount object returns an incorrect file count for bootflash:, usb0:, slot0:, slaveslot0:, slavebootflash:, and slaveusb0.

Workaround: Use the dir device command (for example, dir bootflash:) to obtain the correct file count. CSCti74130. If multicast is configured and you make changes to the configuration, Traceback and CPUHOG messages are displayed if the following conditions exist: – At least 10K groups and roughly 20K mroutes exist. – IGMP joins with source traffic transit to all the multicast groups.This is caused by the large number of updates generating SPI messages that must be processed by the CPU to ensure that the platform is updated with the changes in all the entries. Workaround: None. CSCti20312. With traffic running, entering clear ip mroute.

with larger number of mroutes and over 6 OIFs will cause Malloc Fail messages to display. You cannot clear a large number of mroutes at one time when traffic is still running. Workaround: Do not clear all mroutes at once. CSCtn06753.

Although you can configure subsecond PIM query intervals on Catalyst 4500 platforms, such an action represents a compromise between convergence (reaction time) and a number of other factors (number of mroutes, base line of CPU utilization, CPU speed, processing overhead per 1 m-route, etc.).You must account for those factors when configuring subsecond PIM timers. We recommend that you set the PIM query interval to a minimum of 2 seconds. By adjusting the available parameters, you can achieve flawless operation; that is, a top number of multicast routes per given convergence time on a specific setup. Energywise WOL is not “waking up” a PC in hibernate or standby mode.Workaround: None. CSCtr51014. When OSPFv3 LSA throttling is configured, rate limiting does not take effect for a few minutes. WorkAround: None.

CSCtw86319. The ROMMON version number column in the output of show module command is truncated. Workaround: Use the show version command.CSCtr30294.

IP SLA session creation fails randomly for various 4-tuples. Workaround: Select an alternate destination or source port. CSCty05405.

The system cannot scale to greater than 512 SIP flows with MSP and metadata enabled. Workaround: None.

CSCty79236. When either the RADIUS-server test feature is enabled or RADIUS-server dead-criteria is configured, and either RADIUS-server deadtime is set to 0 or not configured, the RADIUS-server status is not properly relayed to AAA.Workaround: Configure both dead-criteria and deadtime. CSCtl06706. If you use the quick option in the issu changeversion command, the following might occur: – Links flap for various Layer 3 protocols. – A traffic loss of several seconds is observed during the upgrade process.

Workaround: Do not use the quick option with the issu changeversion command. CSCto51562. While configuring an IPv6 access-list, if you specify hardware statistics as the first statement in v6 access-list mode (i.e. Before issuing any other v6 ACE statement), it will not take effect.Similarly, your hardware statistics configuration will be missing from the output of the show running command.

You will not experience this behavior with IPv4 access lists. Workaround: During IPv6 access-list configuration, configure at least one IPv6 ACE before the 'hardware statistics' statement. CSCuc53234.

Routed packets that are fragmented are not policed if the egress interface is on the VSS Standby switch. However, if the egress interface is on the VSS active switch, these packets are policed. This applies to QoS policing only.QoS marking, shaping and sharing behave as expected.

Workaround: None. CSCub14402.

When an IPv6 FHS policy is applied on a VLAN and an EtherChannel port is part of that VLAN, packets received by EtherChannel (from neighbors) are not bridged across the local switch.Workaround: Apply FHS policies on a non EtherChannel port rather than a VLAN. CSCua53148. During VSS conversion, the switch intended as the Standby device may require up to 9 minutes to reach an SSO state. The boot up time depends on the configuration and on the number of line cards in the system. Workaround: None. CSCua87538.

An incorrect module number is displayed in the console messages during boot up of a Cat4500X VSS. Because the Catalyst 4500-X is a “fixed” configuration device, in a VSS, you would expect the two systems to be labeled 'Module 1' and 'Module 2.’ However, because of software implementation similarities with the modular Catalyst 4500E series switches, the Standby switch is labeled 'Module 11.’ Workaround: None.CSCub11632. Memory allocation failures can occur if more than 16K IPv6 multicast snooping entries are present. Workaround: None. CSCuc77376. Beginning with IOS Release XE 3.5.0E, error messages that occur when a QoS policy is applied will no longer appear directly on the console when no logging console is configured.They will appear only when a logging method is active (e.g., logging buffered, logging console, ).

Workaround: None. CSCuf86375. Setting a cos value based on QoS group triggers the following error message in a VSS system. Cisco Bug Search Tool The Bug Search Tool (BST), which is the online successor to Bug Toolkit, is designed to improve the effectiveness in network risk management and device troubleshooting. The BST allows partners and customers to search for software bugs based on product, release, and keyword, and aggregates key data such as bug details, product, and version. The tool has a provision to filter bugs based on credentials to provide external and internal bug views for the search input.

To view the details of a caveat listed in this document: 1.Access the BST (use your Cisco user ID and password). Enter the bug ID in the Search For: field. Bug ID Headline No export IPv4 unicast map triggered router to crash. Endpoint bypasses restriction given by ISE and gets network access.Self ping to port channel subinterface dropped with LISP decap log.

IGP-LDP sync interoperability for OSPF multiarea adjacency. Paramiko SSH client, having password authentication, fails to connect to IOS. Make toggling Cisco TrustSec SGACL enforcement on Port-channel consistent with other Cisco TrustSec CLIs.

No export IPv4 unicast map triggered router to crash. Headline CSCuv15017 VSS Active Reload causes CTS Ether-channel links on standby to flap. CSCuw93750 ACL merge not happening correctly in WCCP feature.CSCus68182 15.2(3)E2:IPDT Entries are not getting learned on portchannel. CSCuz59601 15.2(4)E2: 3560-CX Flash Inaccessible.CSCuvx default G port's speed auto negotiate to 100M/bps. CSCva37519 Stale flowmgr entry during an IPv6 Terminal Access Controller Access Control System (TACACS) transaction leads to an unexpected reload. CSCvb24396 ACL is partially programmed to hardware with the scale of IPv4 and IPv6 ACLs.

CSCvb20355 Unexpected reload happens when saving configuration files greater than nonvolatile RAM (NVRAM) space.Bug ID Headline Queue-based Transmit/Drop QoS counters for Cisco Catalyst 4000 Series Switches. HTTPs: IOS HTTPS client not enforcing subject-name verification. ENH: Enable support for TLSv1.1 & TLSv1.2 for HTTP secure server/client.Unable to telnet: No wild listener: port 23. Add prefix information in IPv6 RA when system/ SVI is shutdown. SNMP with extended ACL. Cisco ASR 920 Series switches: crash in bcopy called from addnew during reassembly.

“no ip routing protocol purge interface” delete with reload Debug logging - parser issue. Cisco IOS and IOS-XE IKEv2 fragmentation DoS. Cisco Catalyst 3650 and 3850 Series Switches: Syslog produces no output when set to logging queue-limit X.Evaluation of Cisco IOS and IOS-XEl for NTP January 2016.

EEM policies may not be able to send emails.V3Lite IGMP packets sent instead of V3 when UDP based feature is present. IPC-WATERMARK and CHKPT-5-HIGHBUFFER logs leading to reload. Wrong LSP size calculation following MAC move with OTV. Cisco 5760 Wireless LAN Controller crash at snmpsubagent. Syslog: Source-Interface address change does not take effect in IPv6.Crash due to block overrun by AAA banner.

VLAN 1 interface is shutdown during bootup. Evaluation of all for OpenSSL May 2016. Memory leak in ffm process.Crash in IOSd with ‘EPC SM Liaison Update proc’.

Crash when remotely executing show license right-to-use summary.SUP8E VSS active crash due to signr 11 when OIR standby SUP8E. PerfMon entries not idle timing out.

Headline CSCuj56314 UDE on 4500X does not function at 1G CSCtxX:stack:when new switch join stack, traffic loss can be seen. License Issues The OpenSSL toolkit stays under a dual license, i.e. Both the conditions of the OpenSSL License and the original SSLeay license apply to the toolkit. See below for the actual license texts. Actually both licenses are BSD-style Open Source licenses.In case of any license issues related to OpenSSL please contact openssl-core@openssl.org.

Overlight Rpg Pdf Download

OpenSSL License: Copyright © 1998-2007 The OpenSSL Project. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer. Redistributions in binary form must reproduce the above copyright notice, this list of conditions, and the following disclaimer in the documentation and/or other materials provided with the distribution. All advertising materials mentioning features or use of this software must display the following acknowledgment: “This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit ( )”.The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used to endorse or promote products derived from this software without prior written permission.

For written permission, please contact openssl-core@openssl.org. Products derived from this software may not be called “OpenSSL” nor may “OpenSSL” appear in their names without prior written permission of the OpenSSL Project. Redistributions of any form whatsoever must retain the following acknowledgment: “This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit ( )”. THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS”' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.